Table of Contents
As a DIY (do-it-yourself) enthusiast, you must be confident and independent. To thrive, you must inculcate these traits. Who wouldn’t take pride in showing off their handiwork to friends and family? Often, you do not hesitate to point out projects you have completed at home or in your business premises.
Despite the commendable nature of DIY tasks, times exist when you wished you had a helping hand. You could be replacing a broken hinge on the bathroom door, installing kitchen cupboards, or sawing lumber. If you have someone to assist, the work becomes easy and wholesome.
For projects around your home or place of business, working solo is commendable. Yet, failings are never far away. Without any form of help, your project could be a failure. The Rockwell Jawstand is a worthy helper, the third hand on every task. We review two variants of this helper tool, the Rockwell RK9033 vs RK9034 XP.
The Rockwell Jawstand RK9033 is the ideal second or third hand needed for repairs. It has a folding tripod stand design that keeps it stable while also ensuring the stability of the material. Strong clamps on the Jawstand can hold heavy material of up to 220 pounds. Rubber protective material on the clamp creates a firm grip while also preventing damage on wood or paint. The tool supports doors, cabinets, and other materials with a large thickness of 1 ¾ inch as you work on them.
More so, atop the stands are low-friction slides that help keep objects in line as they pass over during sawing. A tilting head on the item allows for the orientation of work at different angles without compromising on accuracy. At 13.2 lbs., the Jawstand is not too heavy to carry around working areas. Besides, the tripod design of its feet prevents the tool from tipping over while you are working on heavy materials.
Besides, the bevel head provides up to 90 degrees of change supported by visible markings for angle accuracy. A graduated height change section guarantees the user of the correct distance from the ground. The RK9033 can reach a height of between 29 inches and 41 inches. With such a range, you rest assured of having support for repair works at different heights.
Rockwell RK9034 JawStand XP
The Rockwell Jawstand XP or RK9034 features folding legs providing ease of storage. Also, the tripod design helps make the equipment less bulky. Whether you are carrying it in a truck or keeping the unit in your garage, the folding legs make it very easy. More so, the tripod leg has an extended span of between 29 inches and 43 inches, which accommodates different height needs.
A height scale marked on the vertical stand comes in handy for work where height change is a critical aspect. Besides, a hand crank that loosens or tightens by turning it clockwise or anti-clockwise ensures that you have the right height. Little wonder that this Rockwell stand has the suffix XP that stands for “Exact Positioning.”
The head has tilting capabilities for instances when you prop objects like doors for smoothing or hinge installation. You can also hang cabinets on the Rockwell RK9034 Jawstand XP. Its largest load capacity is 220 lbs. An aspect that makes the unit capable of bearing much weight without a compromise on strength. Also, smooth rounded surfaces ensure that your workpieces can glide as you cut.
This workpiece comes with a clamp, which allows you the freedom to leave materials fastened on the workbench. You can step away to pick another tool without worrying about your workpiece falling off. The vice has a large span or holding ability of up to 1 ¾ inches.
Low friction rollers on the RK9034 help channel workpieces in a precise manner, hence enhancing accuracy.
Things to consider
In this review, we only featured two work stands, Rockwell RK 9033 and Rockwell RK9034. Other brands exist and you must approach the decision to buy with a clear mind. Take note of these important facts:
A jaw stand should have the capacity to withstand different weights. One day you need to support a door and in the next a kitchen cabinet. Like work, the equipment must tolerate pressure from the item in question. So, for it to keep the weight in check, its construction must feature high-quality material. A stand that wobbles or wiggles during a work session will not give you good output. You end up worrying about your safety plus avoidance of damage resulting in shoddy work. Examine the available stands and buy the one that best meets your DIY requirements.
In our review, we noted that the two products had tripod stands. Each had three foldable legs. That aspect not only added stability but also provided ease of storage. Besides, the RK9033 has holes in its legs, which are most ideal for firming the work stand on the floor. Angling is another crucial aspect. You never know when you will need to work on a material that you have to tilt at, say 45 degrees. The equipment you buy must adapt to such needs. While different designs exist, some are not practical. Be focused when picking a jawstand by examining and comparing features.
Depending on the task at hand, you may have to adjust the height. If the jaw stands in use is not flexible, you will find that you strain too much in some tasks. If you are of medium height, working at low surfaces may not pose a challenge. Yet, if you are a tall person, you must keep bending and standing upright to recover. You could end up with back pains. The two Rockwell support tools have height adjusting features. You might harbor a temptation to buy a Jaw stand that does not have the height change section. Doing so could save you money, but you lose in the end. Avoid such decisions.
You must feel comfortable carrying the unit around. Portability also means getting the equipment ready for work is not complicated. As a home improvement professional, you must travel a lot to client sites. Thus, the Jaw stand you use must be the compact type for easy transportation on your truck. If you are the DIY type, ensure that the unit must be easy to move around, set up and store afterward. Choose a tool that is lightweight and one that allows you to work. Your desire is that customers will associate your services with competence. That is how you get referrals.
Wisdom dictates that you select your budget. In other words, how much do you intend to spend on a work stand? Once you answer this question, you will be in an excellent position to narrow down on options. With a figure in mind, you can now proceed to read reviews with confidence. Also, you will compare stock available versus the features each equipment packs.
You are in luck to have come across our review. By reading it, you now have an idea of that RK1 vs. RK, which is the better alternative. Reviews such as this one contain valuable information, including the pros and cons of each product. In the end, it is a reliable conclusion that you can always trust.
Work support stands are the much-needed extra hand in your workshop. Considering that there are other tools crammed in a small space, storage takes top priority. The tripod design featuring foldable legs solves the storage problem.
Also, by having a piece of equipment with a clamp, your workpieces remain fixed and do not move. Such weakness can cause inaccurate cuts, which is also a mark of poor workmanship. Thus, you must check and compare the size as well as the knobs. They should be tight enough. The quality of components must not escape your keen eye for detail. Where the product features light metal, you would expect easy damage.
Finally, check how far the legs reach when extended. If large enough, you are confident of the stability of the material. Yet, the size of your workshop could limit the leg span. For a small shop, shoot for a stand whose legs yield a reasonable span.
By pitting the Rockwell Jawstand RK9033 vs RK9034, we faced a tight challenge deciding on a winner. Both equipment types have similar features. Take, for instance, weight-bearing capacity. Both can withstand the material weight of 220 lbs.
Moreover, clamps on these two stands can hold workpieces of a thickness of up to 1 ¾ inches. Besides, the two items have a tilting function to support instances where you need the item you are working on to be at an angle.
Nonetheless, we voted for the Rockwell Jawstand XP. It yields better precision in height adjustment compared to its closest alternative, the Rockwell Jawstand RK9033.
Related Posts :
If you are working as a professional welder or starting new you might have thought so many things but maybe somewhere you have not given